10.4" TFT LG LB104V03-A1 640x480 VGA Resolution Display 400nits Backlight LG Philips Industrial Pane

1.Introduction of the 10.4" TFT LG LB104V03-A1 640x480 VGA Resolution Display

The LB104V03-A1 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp (CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has 10.4 inches diagonally measured active display area with VGA resolution(480 vertical by 640 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. The LB104V03-A1 has been designed to apply the interface method that enables low power, high speed, low EMI. The LB104V03-A1 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the LB104V03-A1 characteristics provide an excellent flat display for office automation products such as Notebook PC.

2.Specification of the 10.4" TFT LG LB104V03-A1 640x480 VGA Resolution Display

3.Detail of the 10.4" TFT LG LB104V03-A1 640x480 VGA Resolution Display

4.Why purchase from Hongkong Chance Technology CO., LTD?

Merchandise safekeeping: Planned and organized storage space for safekeeping of your merchandise.

Quality Thresholds: Precise standard operation procedure (SOP) that ensures the quality of your merchandise.

Safe transportation: Fast and safe transportation that ensures safety of your merchandise.

Technology advancement: Professional field applicatoin engineers (FAE) act as your exclusive technical consultant.

5.PACKAGING of 10.4" TFT LG LB104V03-A1 640x480 VGA Resolution Display    

5.1Foggy dew deposited on the surface due to coldness will be caused for polarizer damage, stain and dirt on product. When necessary to take out the products from some place at low temperature for test, etc. It is required for them to be warmed up in a container once at the temperature higher than that of room.

5.2Lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. To prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton.

5.3As the adhesives used for adhering polarizers are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, toluene ,ethanol and isopropyl alcohol..

6.CAUTION FOR OPAERATION of 10.4" TFT LG LB104V03-A1 640x480 VGA Resolution Display   

6.1When the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarizer after the protection film is peeled off.

6.2Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.

6.3The spike noise causes the mis-operation of circuits. It should be lower than following voltage : V=$200mV(Over and under shoot voltage)

7.How we do business

8.Quality Assurance of Display Panel

If you're looking for the 10.4" tft lg lb104v03-a1 640x480 vga resolution display 400nits backlight lg philips industrial panel, welcome to check datasheet with us. As one of the professional China suppliers in this field, we will also offer you the PDF display. Now, please be free to buy the quality products in stock with reasonable price from us.